First time setup

1. Power on

   If you want to use TF card, please insert before powering on the router. Hot plugging for TF card is not supported.

   Plug one end of the power adapter into the router and the other end into an outlet. It will automatically power on.

2. Connect to the router

   You can connect to router via an ethernet cable or via Wi-Fi.

   • Connect via cable

     Connect your computer to the LAN port of the router via Ethernet cable.

   • Connect via Wi-Fi

     The SSID was printed on the bottom label of the router with the following formats:

     COMBWAY-XXX or COMBWAY-XXX-5G